The distance from Beaver Dam to Pine City is 2,548 kilometers by road including 1,940 kilometers on motorways. Road takes approximately 25 hours and 8 minutes and goes through St. George, Vail, Denver, North Platte, Grand Island, Columbus and Sioux City.
How much does it cost to drive from Beaver Dam to Pine City?
Fuel cost:
362.8 AUD
This fuel cost is calculated as: (Route length 2,548 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.78 AUD / L)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Beaver Dam to Pine City?
Driving time:
25 h 8 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
1,431 km with a maximum speed 110 km/h = 13 h
275 km with a maximum speed 105 km/h = 2 h 37 min
64 km with a maximum speed 100 km/h = 38 min
41 km with a maximum speed 97 km/h = 25 min
547 km with a maximum speed 90 km/h = 6 h 4 min
66 km with a maximum speed 89 km/h = 44 min
16 km with a maximum speed 80 km/h = 11 min
91 km with a maximum speed 80 km/h = 1 h 8 min
8 km with a maximum speed 72 km/h = 6 min
3 km with a maximum speed 64 km/h = 2 min
3 km with a maximum speed 56 km/h = 2 min
3 km with a maximum speed 48 km/h = 4 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Beaver Dam to Pine City by land?
The distance between Beaver Dam and Pine City is 2,548 km by road including 1,940 km on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Beaver Dam and Pine City respectively.
How far is Beaver Dam to Pine City by plane?
The shortest distance (air line, as the crow flies) between Beaver Dam and Pine City is 2,003 km.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Beaver Dam and Pine City respectively. Actual distance between airports may be different.
How many hours is Beaver Dam from Pine City by plane?
Boeing 737 airliner needs 2 h 30 min to cover the distance of 2,003 km at a cruising speed of 800 km/h.
Small plane "Cessna 172" needs 9 h 6 min to flight this distance at average speed of 220 km/h.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Beaver Dam to Pine City?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 8 h 20 min to cover the distance of 2,003 km at a cruising speed of 240 km/h.
Popular "Robinson R44" needs 9 h 32 min to flight this distance at average speed of 210 km/h.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Beaver Dam and Pine City?
The halfway point between Beaver Dam and Pine City is Sterling. It is located about 19 km from the exact midpoint by road.
The distance from Sterling to Beaver Dam is 1,255 km and driving will take about 11 h 49 min. The road between Sterling and Pine City has length 1,293 km and will take approximately 13 h 18 min.
The other cities located close to halfway point:
Brush is in 1,198 km from Beaver Dam and 1,350 km from Pine City
Fort Morgan is in 1,184 km from Beaver Dam and 1,363 km from Pine City
Log Lane Village is in 1,181 km from Beaver Dam and 1,367 km from Pine City
Where is Beaver Dam in relation to Pine City?
Beaver Dam is located 2,003 km south-west of Pine City.
Beaver Dam has geographic coordinates: latitude 36.89991, longitude -113.93539.
Pine City has geographic coordinates: latitude 45.82607, longitude -92.96854.
Which highway goes from Beaver Dam to Pine City?
The route from Beaver Dam to Pine City follows I 70, US 6, I 80, I 76, US 50, I 15, MN 60, US 30, US 169.