Distance between Canoe Furnace PA and Tratebas Mill IN
The distance from Canoe Furnace to Tratebas Mill is 677 kilometers by road including 669 kilometers on motorways. Road takes approximately 6 hours and 15 minutes and goes through Elyria, Toledo, South Bend, Girard, Streetsboro, Hudson and Brecksville.
| Shortest distance by air | 627 km ✈️ |
| Car route length | 677 km 🚗 |
| Driving time | 6 h 15 min |
| Fuel amount | 54.2 L |
| Fuel cost | 96.4 AUD |
| Point | Distance | Time | Fuel | |
| Canoe Furnace | 0 km | 00 min | 0.0 L | |
|
I 80 106 km, 1 h 01 min
|
||||
| Girard | 106 km | 1 h 01 min | 8.4 L | |
|
I 80 62 km, 33 min
|
||||
| Streetsboro | 167 km | 1 h 35 min | 13.0 L | |
|
I 80 11 km, 06 min
|
||||
| Hudson | 179 km | 1 h 41 min | 13.8 L | |
|
I 80 15 km, 08 min
|
||||
| Brecksville | 194 km | 1 h 49 min | 15.5 L | |
|
I 80 3 km, 01 min
|
||||
| Broadview Heights | 197 km | 1 h 51 min | 15.5 L | |
|
I 80 39 km, 21 min
|
||||
| Elyria | 236 km | 2 h 12 min | 18.7 L | |
|
I 80 137 km, 1 h 14 min
|
||||
| Toledo | 373 km | 3 h 27 min | 29.5 L | |
|
I 80 234 km, 2 h 07 min
|
||||
| South Bend | 607 km | 5 h 34 min | 48.0 L | |
|
I 80 71 km, 40 min
|
||||
| Tratebas Mill | 678 km | 6 h 15 min | 54.1 L | |
Frequently Asked Questions
How much does it cost to drive from Canoe Furnace to Tratebas Mill?
Fuel cost: 96.4 AUD
This fuel cost is calculated as: (Route length 677 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.78 AUD / L)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Canoe Furnace to Tratebas Mill?
Driving time: 6 h 15 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 654 km with a maximum speed 110 km/h = 5 h 56 min
- 9 km with a maximum speed 105 km/h = 5 min
- 3 km with a maximum speed 100 km/h = 1 min
- 3 km with a maximum speed 89 km/h = 2 min
- 6 km with a maximum speed 50 km/h = 7 min
- 1 km with a maximum speed 20 km/h = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Canoe Furnace to Tratebas Mill by land?
The distance between Canoe Furnace and Tratebas Mill is 677 km by road including 669 km on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Canoe Furnace and Tratebas Mill respectively.
How far is Canoe Furnace to Tratebas Mill by plane?
The shortest distance (air line, as the crow flies) between Canoe Furnace and Tratebas Mill is 627 km.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Canoe Furnace and Tratebas Mill respectively. Actual distance between airports may be different.
How many hours is Canoe Furnace from Tratebas Mill by plane?
Boeing 737 airliner needs 47 min to cover the distance of 627 km at a cruising speed of 800 km/h.
Small plane "Cessna 172" needs 2 h 51 min to flight this distance at average speed of 220 km/h.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Canoe Furnace to Tratebas Mill?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 2 h 36 min to cover the distance of 627 km at a cruising speed of 240 km/h.
Popular "Robinson R44" needs 2 h 59 min to flight this distance at average speed of 210 km/h.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Canoe Furnace and Tratebas Mill?
The halfway point between Canoe Furnace and Tratebas Mill is Glenwood. It is located about 28 km from the exact midpoint by road.
The distance from Glenwood to Canoe Furnace is 366 km and driving will take about 3 h 23 min. The road between Glenwood and Tratebas Mill has length 311 km and will take approximately 2 h 52 min.
The other cities located close to halfway point:
Where is Canoe Furnace in relation to Tratebas Mill?
Canoe Furnace is located 627 km east of Tratebas Mill.
Canoe Furnace has geographic coordinates: latitude 41.18895, longitude -79.51782.
Tratebas Mill has geographic coordinates: latitude 41.56309, longitude -87.01781.
Which highway goes from Canoe Furnace to Tratebas Mill?
The route from Canoe Furnace to Tratebas Mill follows I 80, I 90.
Other minor sections pass along the road:
- SR 11: 6 km