Distance between Engineer Springs CA and Tecate CA
The distance from Engineer Springs to Tecate is 17 kilometers by road. Road takes approximately 12 minutes and goes through Tecate and Barrett Junction.
| Shortest distance by air | 14 km ✈️ |
| Car route length | 17 km 🚗 |
| Driving time | 12 min |
| Fuel amount | 1.3 L |
| Fuel cost | 2.4 AUD |
| Point | Distance | Time | Fuel | |
| Engineer Springs | 0 km | 00 min | 0.0 L | |
|
CA 94 7 km, 04 min
|
||||
| Barrett Junction | 7 km | 04 min | 0.5 L | |
|
CA 94 8 km, 05 min
|
||||
| Tecate | 15 km | 10 min | 1.1 L | |
|
CA 188 1 km, 01 min
|
||||
| Tecate | 17 km | 12 min | 1.3 L | |
Frequently Asked Questions
How much does it cost to drive from Engineer Springs to Tecate?
Fuel cost: 2.4 AUD
This fuel cost is calculated as: (Route length 17 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.77 AUD / L)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Engineer Springs to Tecate?
Driving time: 12 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 11 km with a maximum speed 90 km/h = 7 min
- 5 km with a maximum speed 80 km/h = 3 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Engineer Springs to Tecate by land?
The distance between Engineer Springs and Tecate is 17 km by road.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Engineer Springs and Tecate respectively.
What city is halfway between Engineer Springs and Tecate?
The halfway point between Engineer Springs and Tecate is Barrett Junction. It is located about 1 km from the exact midpoint by road.
The distance from Barrett Junction to Engineer Springs is 7 km and driving will take about 4 min. The road between Barrett Junction and Tecate has length 10 km and will take approximately 7 min.
Where is Engineer Springs in relation to Tecate?
Engineer Springs is located 14 km north-west of Tecate.
Engineer Springs has geographic coordinates: latitude 32.62811, longitude -116.76502.
Tecate has geographic coordinates: latitude 32.58337, longitude -116.62852.
Which highway goes from Engineer Springs to Tecate?
The route from Engineer Springs to Tecate follows CA 94.
Other minor sections pass along the road:
- CA 188: 2 km