Distance between General Pico and Parque Industrial

The distance from General Pico to Parque Industrial is 145 kilometers by road. Road takes approximately 1 hour and 45 minutes and goes through Santa Rosa, Este, Centro and Zona Franca.

Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
-35.66361, -63.75428 0 km 0:00 00 min 0.0 L
0 km, 00 min
Este 0 km 0:00 00 min 0.0 L
0 km, 00 min
Centro 1 km 0:00 00 min 0.1 L
3 km, 03 min
Zona Franca 4 km 0:04 04 min 0.2 L
RP101 11 km, 08 min
Metileo 15 km 0:12 12 min 0.5 L
RP102 RP7 130 km, 1 h 32 min
Santa Rosa 145 km 1:45 1 h 45 min 9.1 L

Frequently Asked Questions

How much does it cost to drive from General Pico to Parque Industrial?

Fuel cost: 20.3 AUD

This fuel cost is calculated as: (Route length 145 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.75 AUD / L)

You can adjust fuel consumption and fuel price here.

How long is a car ride from General Pico to Parque Industrial?

Driving time: 1 h 45 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 86 km with a maximum speed 90 km/h = 57 min
  • 50 km with a maximum speed 80 km/h = 37 min
  • 4 km with a maximum speed 60 km/h = 4 min
  • 1 km with a maximum speed 50 km/h = 1 min
  • 2 km with a maximum speed 40 km/h = 2 min
  • 1 km with a maximum speed 30 km/h = 1 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is General Pico to Parque Industrial by land?

The distance between General Pico and Parque Industrial is 145 km by road.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of General Pico and Parque Industrial respectively.

How far is General Pico to Parque Industrial by plane?

The shortest distance (air line, as the crow flies) between General Pico and Parque Industrial is 120 km.

This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of General Pico and Parque Industrial respectively. Actual distance between airports may be different.

How many hours is General Pico from Parque Industrial by plane?

Boeing 737 airliner needs 9 min to cover the distance of 120 km at a cruising speed of 800 km/h.

Small plane "Cessna 172" needs 32 min to flight this distance at average speed of 220 km/h.

This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.

How long is a helicopter ride from General Pico to Parque Industrial?

Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 30 min to cover the distance of 120 km at a cruising speed of 240 km/h.

Popular "Robinson R44" needs 34 min to flight this distance at average speed of 210 km/h.

This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.

Where is General Pico in relation to Parque Industrial?

General Pico is located 120 km north-east of Parque Industrial.

General Pico has geographic coordinates: latitude -35.66361, longitude -63.75428.

Parque Industrial has geographic coordinates: latitude -36.65604, longitude -64.28715.

Which highway goes from General Pico to Parque Industrial?

The route from General Pico to Parque Industrial follows RP7.

Other minor sections pass along the road:

  • RN5: 31 km
  • RP102: 18 km
Have any questions? Contact us!