Distance between Kingsbury and Port Melbourne

The distance from Kingsbury to Port Melbourne is 22 kilometers by road including 3 kilometers on motorways. Road takes approximately 29 minutes and goes through Reservoir, Preston, Thornbury, Northcote, Fitzroy North, Fitzroy and Carlton.

There are tolls on the route.
Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Kingsbury 0 km 0:00 00 min 0.0 L
2 km, 04 min
Reservoir 2 km 0:04 04 min 0.1 L
27 3 km, 02 min
Preston 5 km 0:07 07 min 0.3 L
27 2 km, 02 min
Thornbury 7 km 0:09 09 min 0.6 L
45 1 km, 01 min
Northcote 9 km 0:11 11 min 0.6 L
45 2 km, 02 min
Fitzroy North 11 km 0:13 13 min 0.8 L
45 2 km, 03 min
Fitzroy 13 km 0:16 16 min 1.0 L
46 1 km, 01 min
East Melbourne 14 km 0:18 18 min 1.1 L
32 3 km, 04 min
Docklands 17 km 0:22 22 min 1.3 L
32 3 km, 03 min
Port Melbourne 20 km 0:26 26 min 1.5 L
M2 2 km, 02 min
-37.83336, 144.92192 22 km 0:28 28 min 1.7 L

Frequently Asked Questions

How much does it cost to drive from Kingsbury to Port Melbourne?

Fuel cost: 2.8 AUD

This fuel cost is calculated as: (Route length 22 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.61 AUD / L)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Kingsbury to Port Melbourne?

Driving time: 29 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 5 km with a maximum speed 80 km/h = 3 min
  • 3 km with a maximum speed 70 km/h = 2 min
  • 8 km with a maximum speed 60 km/h = 7 min
  • 5 km with a maximum speed 20 km/h = 13 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Kingsbury to Port Melbourne by land?

The distance between Kingsbury and Port Melbourne is 22 km by road including 3 km on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Kingsbury and Port Melbourne respectively.

What city is halfway between Kingsbury and Port Melbourne?

The halfway point between Kingsbury and Port Melbourne is Fitzroy North.

The distance from Fitzroy North to Kingsbury is 11 km and driving will take about 13 min. The road between Fitzroy North and Port Melbourne has length 11 km and will take approximately 15 min.

The other cities located close to halfway point:

  • Northcote is in 9 km from Kingsbury and 13 km from Port Melbourne
  • Fitzroy is in 13 km from Kingsbury and 9 km from Port Melbourne
  • East Melbourne is in 14 km from Kingsbury and 8 km from Port Melbourne

Where is Kingsbury in relation to Port Melbourne?

Kingsbury is located 16 km north-east of Port Melbourne.

Kingsbury has geographic coordinates: latitude -37.71557, longitude 145.03556.

Port Melbourne has geographic coordinates: latitude -37.83336, longitude 144.92192.

Which highway goes from Kingsbury to Port Melbourne?

The route from Kingsbury to Port Melbourne follows 45.

Other minor sections pass along the road:

  • 32: 3 km
  • 27: 3 km
  • M2: 2 km
Have any questions? Contact us!