Distance between Paynesville MI and Agate MI
The distance from Paynesville to Agate is 7 kilometers by road. Road takes approximately 5 minutes and goes through Bruce Crossing and Gem.
| Shortest distance by air | 7 km ✈️ |
| Car route length | 7 km 🚗 |
| Driving time | 5 min |
| Fuel amount | 0.6 L |
| Fuel cost | 1 AUD |
| Point | Distance | Time | Fuel | |
| Bruce Crossing | 0 km | 00 min | 0.0 L | |
|
M 28 7 km, 05 min
|
||||
| Agate | 7 km | 05 min | 0.4 L | |
Frequently Asked Questions
How much does it cost to drive from Paynesville to Agate?
Fuel cost: 1 AUD
This fuel cost is calculated as: (Route length 7 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.8 AUD / L)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Paynesville to Agate?
Driving time: 5 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 2 km with a maximum speed 90 km/h = 1 min
- 5 km with a maximum speed 80 km/h = 3 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Paynesville to Agate by land?
The distance between Paynesville and Agate is 7 km by road.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Paynesville and Agate respectively.
Where is Paynesville in relation to Agate?
Paynesville is located 7 km north-west of Agate.
Paynesville has geographic coordinates: latitude 46.52355, longitude -89.11653.
Agate has geographic coordinates: latitude 46.47411, longitude -89.07014.
Which highway goes from Paynesville to Agate?
The route from Paynesville to Agate follows M 28.