The distance from Port Macquarie to Brownsville is 469 kilometers by road including 387 kilometers on motorways. Road takes approximately 4 hours and 46 minutes and goes through Sovereign Hills, Johns River, Coopernook, Jones Island, Ghinni Ghinni, Cundletown and Dumaresq Island.
How much does it cost to drive from Port Macquarie to Brownsville?
Fuel cost:
66.5 AUD
This fuel cost is calculated as: (Route length 469 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.77 AUD / L)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Port Macquarie to Brownsville?
Driving time:
4 h 46 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
297 km with a maximum speed 110 km/h = 2 h 42 min
66 km with a maximum speed 100 km/h = 39 min
18 km with a maximum speed 90 km/h = 11 min
45 km with a maximum speed 80 km/h = 33 min
29 km with a maximum speed 70 km/h = 25 min
12 km with a maximum speed 60 km/h = 12 min
1 km with a maximum speed 50 km/h = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Port Macquarie to Brownsville by land?
The distance between Port Macquarie and Brownsville is 469 km by road including 387 km on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Port Macquarie and Brownsville respectively.
How far is Port Macquarie to Brownsville by plane?
The shortest distance (air line, as the crow flies) between Port Macquarie and Brownsville is 392 km.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Port Macquarie and Brownsville respectively. Actual distance between airports may be different.
How many hours is Port Macquarie from Brownsville by plane?
Boeing 737 airliner needs 29 min to cover the distance of 392 km at a cruising speed of 800 km/h.
Small plane "Cessna 172" needs 1 h 46 min to flight this distance at average speed of 220 km/h.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Port Macquarie to Brownsville?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 1 h 38 min to cover the distance of 392 km at a cruising speed of 240 km/h.
Popular "Robinson R44" needs 1 h 52 min to flight this distance at average speed of 210 km/h.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Port Macquarie and Brownsville?
The halfway point between Port Macquarie and Brownsville is Beresfield. It is located about 1 km from the exact midpoint by road.
The distance from Beresfield to Port Macquarie is 233 km and driving will take about 2 h 16 min. The road between Beresfield and Brownsville has length 236 km and will take approximately 2 h 30 min.
The other cities located close to halfway point:
Lenaghan is in 237 km from Port Macquarie and 232 km from Brownsville
Tarro is in 230 km from Port Macquarie and 239 km from Brownsville
Minmi is in 241 km from Port Macquarie and 228 km from Brownsville
Where is Port Macquarie in relation to Brownsville?
Port Macquarie is located 392 km north-east of Brownsville.
Port Macquarie has geographic coordinates: latitude -31.42995, longitude 152.91035.
Brownsville has geographic coordinates: latitude -34.4825, longitude 150.81083.
Which highway goes from Port Macquarie to Brownsville?
The route from Port Macquarie to Brownsville follows A1, M1.