Distance between Ringwood and Belgrave

The distance from Ringwood to Belgrave is 22 kilometers by road including 4 kilometers on motorways. Road takes approximately 23 minutes and goes through Ringwood East, Wantirna, Wantirna South, Knoxfield, Ferntree Gully, Upper Ferntree Gully and Upwey.

There are tolls on the route.
Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Ringwood 0 km 0:00 00 min 0.0 L
M3 7 km, 08 min
Wantirna 7 km 0:08 08 min 0.3 L
26 3 km, 02 min
Wantirna South 10 km 0:11 11 min 0.7 L
26 1 km, 01 min
Knoxfield 11 km 0:12 12 min 0.8 L
26 3 km, 02 min
Ferntree Gully 13 km 0:14 14 min 0.9 L
26 3 km, 02 min
Upper Ferntree Gully 17 km 0:17 17 min 1.2 L
C412 2 km, 01 min
Upwey 19 km 0:19 19 min 1.4 L
C412 1 km, 01 min
Tecoma 20 km 0:20 20 min 1.6 L
C412 2 km, 03 min
Belgrave 22 km 0:23 23 min 1.6 L

Frequently Asked Questions

How much does it cost to drive from Ringwood to Belgrave?

Fuel cost: 2.9 AUD

This fuel cost is calculated as: (Route length 22 km / 100 km) * (Fuel consumption 8 L/100 km) * (Fuel price 1.64 AUD / L)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Ringwood to Belgrave?

Driving time: 23 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 4 km with a maximum speed 100 km/h = 2 min
  • 9 km with a maximum speed 80 km/h = 6 min
  • 3 km with a maximum speed 70 km/h = 2 min
  • 2 km with a maximum speed 60 km/h = 1 min
  • 1 km with a maximum speed 50 km/h = 1 min
  • 3 km with a maximum speed 20 km/h = 8 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Ringwood to Belgrave by land?

The distance between Ringwood and Belgrave is 22 km by road including 4 km on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Ringwood and Belgrave respectively.

What city is halfway between Ringwood and Belgrave?

The halfway point between Ringwood and Belgrave is Knoxfield.

The distance from Knoxfield to Ringwood is 11 km and driving will take about 12 min. The road between Knoxfield and Belgrave has length 11 km and will take approximately 11 min.

The other cities located close to halfway point:

  • Wantirna South is in 10 km from Ringwood and 12 km from Belgrave
  • Ferntree Gully is in 13 km from Ringwood and 9 km from Belgrave

Where is Ringwood in relation to Belgrave?

Ringwood is located 15 km north-west of Belgrave.

Ringwood has geographic coordinates: latitude -37.81149, longitude 145.23342.

Belgrave has geographic coordinates: latitude -37.91206, longitude 145.35523.

Which highway goes from Ringwood to Belgrave?

The route from Ringwood to Belgrave follows 26.

Other minor sections pass along the road:

  • C412: 4 km
  • 22: 3 km
  • M3: 3 km
  • 34: 1 km
The distance between Ringwood and Belgrave is ranked 9,748th in the ranking popularity.
Have any questions? Contact us!
By submitting this form, you agree to our Privacy Policy.